top of page
RETROFITS
PREPARE & INSTALL CORNERS
1
Position legs over holes and firmly insert rail.
3
Add screws through pilot holes to attach corner to rail.
2
Put corner in place and drill 2 pilot holes
on each side through the corner piece into the rail.
4
Do not overtighten screws.
REINFORCE RAIL SEAMS
1
Measure 2” from top and 2” from both sides of seam.
3
Use a counter sink bit on the pilot holes.
2
Drill a pilot hole on each side of rail seam.
4
Drill through the rail and joiner to secure.
bottom of page